Monday 28 January 2013

It's Done


I have finished the frame and box so here it is out from under the car this shows the upper frame support with the extension arms which bolt back to the spare wheel well. There are inner pieces of metal which bolt inside the wheel well for additional strength 


From a different angle you can see the inner metal strengtheners one being mouldered to the round base of the wheel well  


Top view


had to cut the forward support holes to allow the frame to swing down for battery box removal  


Have welded two more angle iron support pieces on the base of the box support 



This shows the passengers side inner strengthener 


And the curved drivers side strengthener 


Frame with box 


Using some 25 x 25 mm angle with 8 mm all-thread for holding down battery box 


This is the front hold down clamp


Just showing all-thread I have welded the top nut and thread 


Just adding the brace for the drivers side support bar which clamps back to the wheel well









Cheers 

No comments:

Post a Comment